N.R. Murphy Ltd. - Accessories - Angle Rings. Elbows, Ducts & more

Accessories - Angle Rings. Elbows, Ducts & more

N. R. Murphy Ltd. offers many different components for our products, some of which include:

Stamped & Rolled Angle Rings:

N.R. Murphy companion rings are mainly used in joining sheet metal ducts together in dust and air handling systems. Standard steel rings are of black iron unpainted and available from stock.

Sizes & Specifications

Larger sizes and other alloys are also available.

Blast Gates:

Cast Aluminum	Fabricated*
Half Collar Sizes & Specifications	Half Collar Sizes & Specifications
Full Collar Sizes & Specifications	Full Collar Sizes & Specifications
* Fabricated Blast Gates are made of steel with glavanized slides

Elbows:

	Flat Back Elbows For abrasive materials the Murphy replaceable back elbow is available in all sizes. Featues: Heavy gauge removable black strip which can be made of special alloy or line with rubber thus cutting the cost of replacing the whole elbow. (90° shown - 45° & 30° also available)
	Galvanized Long Radius Elbows Sizes: 4" through 14" - 22 Gauge 15" through 18" - 20 Gauge 19" through 36" - 16 Gauge (other gauges also available) Turned or welded. Black also available

Galvanized Spiral Duct:

Sizes & Specifications

Handles:

Pull length 5 1/2", over all length 8 1/8", overall width 1 1/4".
Ideally suited for doors, access openings, trunks, boxes, plus many other applications. Specify Murphy Type "A" handles on your next job. They can be painted or plated to specifications.

Sizes & Specifications

Catches & Keepers:

Cadmium plated. A strong catch. Very useful for many applications.

Length = 3½"

Flexible Duct:

Sizes: 2", 2½", 3", 4", 5", 6", 7", 8", 10", 12", 14"

Flexible duct is available in both non metalic and steel and both types are for material handling.

Other sizes and types available on request.

Floor Sweep:

Overall Sizes: Height= 9" Width="10" Depth = 7 3/4"

Heavy gauge welded construction.
Transitions to 6" and 7" round also available.

2 Way Diverters:

Special power operated diverters available on request.

Transitions to any diameter are available

Sizes & Specifications

Ball Joints:

Spun metal - zinc coated after spinning, from 18 ga material.

Maxiumum swivel 25°.

Sizes & Specifications

Fabricated Cleanout Door:

Pipe Diameter, Hole and Door Sizes

Clamps:

Sizes: 4" through to 10"

S.A.S.L. (Swivel Action Snap Lock)
Larger Sizes available upon request.

Tapers:

Std. Sizes: 3 to 5

4 to 5
5 to 6
6 to 7

Y Branches:

Std. Sizes:

3 x 3 to 4
3 x 3 to 5

4 x 4 to 4
4 x 4 to 5
4 x 4 to 6
4 x 4 to 7

5 x 5 to 5
5 x 5 to 7

6 x 6 to 6
6 x 6 to 7
6 x 6 to 8

Nozzles:

Square	Side	Flat
Std. Sizes: 5 x 5 to 4 6 x 6 to 5 7 x 7 to 6 8 x 8 to 7	Std. Sizes: 4 x 8 to 4 4 x 10 to 4 5 x 5 to 4 5 x 8 to 5 6 x 10 to 6	Std. Sizes: 8 x 1.5 to 4 8 x 1.5 to 5

Copyright © 2000-2012 N.R. Murphy Ltd.	[ Polices \| Disclaimer ]	WebSite Design by Galganov